135 Cinema Film - FPP Kodak Vision 50D (1 Roll)

135 Cinema Film - FPP Kodak Vision 50D (1 Roll)
$7.99

Item Description

A little bit of Hollywood in your 35mm still camera? Yes! Kodak's world-famous Vision 3 Motion Picture films stock is now hand-rolled for you to shoot!!

Kodak Vision 3 - 50D 35mm Film

Daylight Balanced / 50 iso / Non-DX Coded

1 Roll / 24 exposures / Fresh-Dated / Process: ECN-2*

*NOTICE: This film can not be processed by any commercial film lab EXCEPT for Little Film Lab or for folks who are home processing using our FPP Home Color Negative Processing Kit.

Ultra Fresh and Made in the USA! - Our film is purchased fresh and direct from Eastman Kodak USA. We do not use "re-canned film" or "short ends"!

Kodak 50D is a super-fine grain, medium contrast 50 iso daylight film. "50D demonstrates all the family qualities you’ve come to expect — unrivaled highlight latitude, flexibility

in post and proven archival stability. It also proudly touts the world’s finest film grain to ensure a pristine, clean image that is full
of color and detail , especially in high contrast daylight situations."

Read more: http://motion.kodak.com/motion/Products/Production/Color_Negative_Films/5203.htm#ixzz3DPgNEiyh

Images on this page shot by Michael Raso / Canon EOS Rebel Ti 35mm slr camera / Canon EF 17-35mm f2.8 lens / Self processed in FPP's Unicolor Kit / Scanned using the Epson V700

Why can't I process this film at my favorite C-41 lab?

Kodak's Vision 3 motion picture films have an additional layer (on the shiny, not the emulsion side) called a "Rem Jet". This layer aids the film traveling at 24fps in motion picture cameras. Although technically this film can be processed C-41, this Rem Jet will foul commercial lab's equipment and there for can not be commercially processed.

What commercial lab will process my negs, scan and or print for me?

You can send your film to the The Camera Shop ( http://www.thecamerashop.com/downloads/Miscellaneous_Film_Processing_Prices_06-01-15.pdf ) or Little Film Lab in California, USA http://www.littlefilmlab.com/services/
 

Are you sure my local or favorite lab can't process this film?!

YES! WE ARE SURE! This film MUST BE self-processed or sent to the Little Film Lab. Do not send out this film to your regular processor. It will be returned to you or your actions will foul your lab's gear. :(

How do I process this film with FPP's c-41 Kit?

In addition to the normal directions for C-41 home-processing please add the following step.

After your Blix, rinse your film in a half bucket of hot water (80 - 102 degrees F). With your thumb, gently rub the non-emulsion side of your film as you remove it from your film reel. Careful not to scratch the emulsion of your film. Final rinse under running water before submerging your film into the two-minute Stabilizer. You will see the black rem jet in your water as you rinse.

That's it! Hang your film to dry and then scan! Enjoy!!!!

Sample Images

Kodak Vision 3 - 50D image by Michael Raso
Kodak Vision 3 - 50D image by Michael Raso
Kodak Vision 3 - 50D image by Michael Raso
Kodak Vision 3 - 50D image by Michael Raso

Tags